RSS Feeds Twitter LinkedIn YouTube Flickr
Media Corner

ITER Components

High_Voltage_Ring_1.1  ELISE test facility in Garching, Germany, Foto: IPP
 
ELISE test facility in Garching, Germany, Foto: IPP
 
Garching bei München, 27.11.2012 / Foto: IPP (honorarfrei) Max-Planck-Institut für Plasmaphysik Einweihung Teststand "ELISE"
 
2 pre-machined radial plates ready for electron beam welding operations in the welding shop (copyright Christophe Chabert)
 
Europe’s first radial plate for the series production during final machining at CNIM May 2014
 
Viewing a pre-machined radial plate ready for electron beam welding operations in the welding shop CNIM May 2014
 
Turn insulation machine in operation
 
Extraction of wound conductor from the heat treatment furnace
 
General view of transfer and flipping tooling
 
Close-up of the turn insulation machine
 
Welding operators inspecting laser welds on the DP prototype
 
Welding robots in action on the CP laser welding station
 
Section view of laser-welded 3m RP mock-up
 
Insertion of the conductor in the leak test tank
 
Extraction of wound conductor from the heat treatment furnace
 
DP prototype on the turn insulation machine
 
Flipping operation of the DP prototype
 
Welding robots in action on the CP laser welding station
 
Welding robots in action on the CP laser welding station
 
An ASG operator and a CNIM operator during the dimensional check on the side radial plate prototype
 
Top view of one of the bay of the facility in La Spezia. Oven visible in the far end.
 
External view of the ASG facilities in La Spezia, where the 10 european winding packs will be manufactured
 
Top view of the winding machine
 
A top view of the side radial plate during dimensional checks with the laser tracker
 
The unspooling unit of the winding machine. On this unit the conductor spool is placed and slowly unwound during the operation, feeding the conductor during the formation of the double pancake
 
ASG operators working on the winding table
 
One of the ASG operators of the winding  machine while acting on the remote control of the of the machine
 
A detail of the combs on the winding table of the winding machine. It is between the teeth of such comb that the conductor is placed after bending
 
A detail of the regulation system used to create a perfect flap plane during the dimensional check of the radial plates
 
A detail of the grooves of the side radial plate prototype
 
The clean area. At the bottom it is visible the winding line and in the middle the side radial plate prototype during dimensional check with laser technology.
 
Close up of the motors driving the fans that, in the oven, recirculate the heated argon inside the oven.
 
The oven where the heat treatment of up to 3 double pancakes will be carried out. The heat treatment is carried out in inert atmosphere and with temperatures up to 650C
 
The clean area where bending of the conductor to form the double pancake , conductor insertion into the radial plate and wrapping of the electric insulation will be carried out
 
The lifting of the regular radial plate prototype with a special lifting frame
 
A view of the clean area, where bending of the conductor to form the double pancake , conductor insertion into the radial plate and wrapping of the electric insulation will be carried out

Back

Copyright disclaimer:
  1. Please credit F4E as the source of the image. Examples : Photo: F4E; Image: F4E.
  2. The image must not be used to state or imply the endorsement by F4E or any F4E employee of a commercial product, process or service, or used in any other manner that might mislead.
  3. If the image is to be used in advertising or any commercial promotion, layout and copy must be submitted to F4E beforehand for approval.

Twitter
RSS Signup
Signup to our news
You Tube
You Tube